SMC旋轉執行器旋轉氣缸型號,CRB2BW10-90S

EAV3000-F03-5DZ-Q
CRB2BW10-90S
CRB2BW30-270S
CRB2BW15-90SE
CRB2BW15-180S

Connectors are available only for auto switch
types R73, R80 and T79.
Lead wire with connector part nos.
D-LC05: Lead wire 0.5 m
D-LC30: Lead wire 3 m
D-LC50: Lead wire 5 m

SMC旋轉執行器旋轉氣缸型號,CRB2BW10-90S

請務必將速度調節范圍內工作。過zui大速度（0.3秒/90°），可
導致本機卡住或無法操作。
在本節中的表的上數字表示當橡膠保險杠使用的能量因子（在
在旋轉結束），以及較低的數字表示在不使用該橡膠保險杠的能量因子。
調整范圍在表中為100℃。對于90度，請參閱142頁。

Make sure to operate within the speed regulation range. Exceeding the maximum speed (0.3 sec/90°) can
cause the unit to stick or not operate.
The upper numbers in this section in the table indicate the energy factor when the rubber bumper is used (at
the end of the rotation), and the lower numbers indicate the energy factor when the rubber bumper is not used.
Adjustment range in the table is for 100°. For 90°, refer to page 142.